TDK-Lambda Denmark
Browse our AC-DC Converters
Pick from our range of products listed below to get more information about each range. You can narrow your search by using our Quick Product Finder.
Pick a product below for more information about that range:
 PR Nov13.jpg "HWS-A")
| Pick a product below for more information about that range: | ||||
|---|---|---|---|---|
| Product Name | Power Range (W) | Construction | Outputs | |
|
DRB 3 Phase
NEW
120/240W DIN-Rail power supplies DIN Rail mount
|
120 | 240 | DIN Rail mount | 1 o/p |
|
KPSB
NEW
5-25W AC-DC Board Mount Power SuppliesPCB mount
|
5 | 25 | PCB mount | 1 o/p |
|
Alpha 1000-1500 (CA)
|
1000 | 1500 | Chassis mount | AC-DC / 1 bis 16 Ausgänge |
|
CFE400M
|
300 | 400 | Chassis mount | AC-DC / 1 Ausgang |
|
DPP
|
15 | 960 | DIN Rail mount | AC-DC / 1 Ausgang |
|
DRB
|
15 | 480 | DIN Rail mount | AC-DC / 1 Ausgang |
|
DRF
|
120 | 960 | DIN Rail mount | AC-DC / 1 Ausgang |
|
DSP
|
7.5 | 100 | DIN Rail mount | AC-DC-Stromversorgung / 1 Ausgang |
|
EFE
|
300 | 400 | Chassis mount | AC-DC / 1 bis 2 Ausgänge |
|
EFE-M
|
200 | 400 | Chassis mount | AC-DC / 1 bis 3 Ausgänge |
|
EVS
|
300 | 600 | Chassis mount | AC-DC / 1 Ausgang |
|
FPS
|
864 | 1008 | Rack mount (Hot swap) | AC-DC / 1 Ausgang |
|
GWS
|
250 | 500 | Chassis mount | AC-DC / 1 Ausgang |
|
HFE
|
1584 | 2500 | Rack mount (Hot swap) | AC-DC / 1 Ausgang |
|
HWS
|
198 | 1560 | Chassis mount | AC-DC / 1 Ausgang |
|
HWS-A
|
10 | 158.4 | Chassis mount | AC-DC / 1 Ausgang |
|
HWS-P
|
300 | 601 | Chassis mount | AC-DC / 1 Ausgang |
|
JWT
|
75 | 100 | Chassis mount | AC-DC / 3 Ausgänge |
|
KPSA
|
4 | 15 | PCB mount | AC-DC / 1 Ausgang |
|
LS
|
20 | 200 | Chassis mount | AC-DC / 1 o/p |
|
LZSA
|
504 | 1512 | Chassis mount | AC-DC / 1 Ausgang |
|
MTW
|
16 | 62 | Chassis mount | AC-DC / 3 Ausgänge |
|
RFE
|
992 | 2500 | Chassis mount | AC-DC / 1 Ausgang |
|
RTW
|
41 | 312 | Chassis mount | AC-DC / 1 Ausgang |
|
SWS600/1000L
|
600 | 1056 | Chassis mount | DC-DC / 1 Ausgang |
|
TPS
|
3000 | 4080 | Chassis mount | AC-DC / 1 Ausgang |
|
Vega
|
300 | 900 | Chassis mount | AC-DC / bis zu 11 Ausgänge |
|
Vega-Lite
|
480 | 900 | Chassis mount | AC-DC / bis zu 11 Ausgänge |
|
ZPSA
|
14 | 100 | Chassis mount | AC-DC / 1 Ausgang |
|
ZWQ
|
80 | 170 | Chassis mount | AC-DC / 4 Ausgänge |
|
ZWS-BAF
|
33 | 302.4 | Chassis mount | AC-DC / 1 Ausgang |
Latest Products »
Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.
CUS350MP
The CUS350MP-1000 AC-DC power supplies are rated at 350W continuous and 1000W peak power output with convection cooling for applications requiring low audible noise or 500W continuous, 1000W peak power with forced air. The series is certified to IEC60601-1 3rd edition (medical), IEC62368-1 and IEC62477-1 (OVCⅢ) with compliance to the EN60601-1-2:2015 Edition 4 immunity requirements. With efficiencies of up to 94%, waste heat is reduced allowing the power supply to operate reliably in a compact 88 x 183 x 44mm package size. A 5V 0.3A standby voltage and remote on/off are fitted as standard. The high peak power rating makes the CUS350MP-1000 suitable for use in printers and other equipment utilizing DC motors.
Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.
XMS500A
The 500W, 1U, single output XMS500A is available in either class I or class II configurations. Both versions achieve class B EMC performance (both conducted and radiated) to EN55011 and EN55032. The whole range is certified for both industrial and medical equipment with BF ready medical isolation (1 x MOPP input / ground, 2 x MOPP input / output and 1 x MOPP output / gnd). Other features include a selection of standby and fan supplies, various case and fan options (including top fan for very low audible noise), remote on/off and dual or single fusing.
Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.
KPSB
The KPSB single output supplies are available with output power ratings of 6W and 25W and output voltages including 3.3V, 5V, 9V, 12V, 15V, and 24V. They operate with a wide input range of 90-264Vac and in ambient temperatures ranging from -40°C to +80°C. Featuring an open frame or encapsulated construction, these light weight converters are Class II double insulated, allowing operation without an earth ground connection. Optional JST plug in connectors are available.
Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.
DTM
The DTM medical external power supplies are housed in a rugged plastic case and are rated from 25 to 300W with output voltages from 5V to 54V. With off-load power draws as low as 75mW and high average efficiencies, the units are compliant to ErP Directives and the DoE Level V and VI standards. Class II operation (no ground wire) is available in 30W, 36W, 65W, 110W & 300W and is suitable for clinical and home healthcare applications.
Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.
WMM30
The WMM medical Wall Mount power supplies are housed in a rugged plastic case and are rated from 25 to 30W with output voltages from 5V to 24V. With off-load power draws as low as 75mW and high average efficiencies, the units are compliant to ErP Directives and the DoE VI standards, have Class II AC input (no ground wire) and are suitable for clinical and home healthcare applications.
