פניה ישירה למענה מהיר



שם:

דוא"ל:
 

מדינה:

טלפון:

אני:
פרטי חברה עסק קטן

הודעה:

תחום עניין:

תאריך אספקה משוער:

נא להשאיר את זה ריק


לחלופין, צור אתנו קשר בערוצים הבאים:

אם אינך בטוח איזה מוצר אתה זקוק, נסה את שלנו חיפוש מוצרים

ספקי כוח AC-DC

i7A

טווח חדש 500 to 750W, 18 to 32V and 18 to 60V Input Non-Isolated Step Down DC-DC Converter

The i7A series can be used to derive additional high power outputs from a 24V, 36V or 48V DC power supply, at a much lower cost than isolated DC-DC converters. Efficiencies of up to 98.5% minimise internal losses and allow the i7A to operate in ambient temperatures of -40oC to +125oC, even with low airflow conditions. The i7A’s design provides low output ripple and excellent response to dynamic loads. Very few required external components are required, compared to discrete solutions, saving cost and printed circuit board space. A choice of three mechanical configurations is available, measuring just 34mm wide and 36.8mm in length. The 11.5mm high open frame model is most suitable for applications requiring a very low profile. A baseplate version for conduction cooling to a cold plate is 12.7mm high, or models with an integral heatsink for convection or forced air cooling are 24.9mm high. Standard features include an output voltage adjustment trim pin, + remote sense, remote on-off (positive or negative logic), input under-voltage, over-current and over-temperature protection.

מאפיינים ויתרונות

  • Up to 750W in a 1/16th Brick Footprint
  • High Efficiency - Up to 98.5%
  • Wide 3.3 to 18V or 3.3 to 24V Output Adjustment
  • 18 to 32V or 18 to 60V Input Ranges
  • Low Component Count With Minimal External Components
  • Minimal Derating Requirements in Low Airflow Environments

מידע אודות מגוון המוצרים

הסתר פרטים

הצג פרטים

Part number Power (W) Output info Construction Status Stock Level View PDF datasheet
i7A4W033A033V 500 3.3V - 24V / 33A Open Frame pcb mount New product Check stock   View PDF datasheet
i7A24045A033V 750 3.3V - 18V / 45A Open Frame pcb mount New product Check stock   View PDF datasheet
Key : New product

הורדות טכניות

מידע קשור

מחדר החדשות של טידיקיי-למבדא

24V input DC-DC step-down (buck) converters deliver 750W in a 1/16th brick footprint
קרא מאמר

500W step-down DC-DC buck converters have an output adjustment of 3.3V to 24V and a 1/16th brick footprint
קרא מאמר

הסרטונים שלנו מוצגים בVimeo. בצפייה בתכנים אלה הנך מסכים לתנאים ולמדיניות הפרטיות המפורטים באתר Vimeo.

The i7A series can be used to derive additional high power outputs from a 24V, 36V or 48V DC power supply, at a much lower cost than isolated DC-DC converters. Efficiencies of up to 98.5% minimise internal losses and allow the i7A to operate in ambient temperatures of -40oC to +125oC, even with low airflow conditions. The i7A’s design provides low output ripple and excellent response to dynamic loads. Very few required external components are required, compared to discrete solutions, saving cost and printed circuit board space. A choice of three mechanical configurations is available, measuring just 34mm wide and 36.8mm in length. The 11.5mm high open frame model is most suitable for applications requiring a very low profile. A baseplate version for conduction cooling to a cold plate is 12.7mm high, or models with an integral heatsink for convection or forced air cooling are 24.9mm high. Standard features include an output voltage adjustment trim pin, + remote sense, remote on-off (positive or negative logic), input under-voltage, over-current and over-temperature protection.

משאבים נוספים

TDK-Lambda - Trusted, Innovative, Reliable

PAGE TOP

PAGE TOP