Title:
 

Name:

Company:
 

Country:

Email address:
     

Message:
   

Please leave this empty


Alternatively, you can contact us like this:

Browse our DC-DC Converters

All DC-DC Converters

Test & Measurement

Pick from our range of products listed below to get more information about each range. You can narrow your search by using our Quick Product Finder.

Pick a product below for more information about that range:

Product Name Power Range (W) Construction Outputs
CHVM
NEW
1.4-3W, 12V Input, 180-2000V Output DC-DC ConvertersPOL Non isolated
1.4 3 POL Non isolated 1
DDA
NEW
250-500W Wide range, non isolated dc-dc convertersDIN Rail mount
250 500 DIN Rail mount 1- 2 o/ps
i7A
NEW
750W, 18 to 60V Input Non-Isolated Step Down DC-DC ConverterPCB mount
500 500 PCB mount 1 o/p
i7C
NEW
300W, 9-53V Input, Buck-Boost Non-isolated DC-DC ConvertersPOL Non isolated
300 300 POL Non isolated 1 o/p
PXD-M
NEW
30W Medical and Industrial DC-DC ConvertersPCB mount
30 30 PCB mount 2 o/p
PXG-M
NEW
15-20W Medical and Industrial DC-DC ConvertersPCB mount
15 20 PCB mount 2 o/p
CC-E
1.5W-10W Single & Dual DC-DC convertersIsolated PCB mount
1.5 10 Isolated PCB mount 1 to 2 o/ps
CCG
15 - 30W DC-DC ConvertersIsolated PCB mount
15 30 Isolated PCB mount 1 o/p
CC-P-E
DC-DC ConverterIsolated PCB mount
14.9 30 Isolated PCB mount 1 o/p
CE1000
1.75W-30W DC-DC POL converters POL Non isolated
1.75 30 POL Non isolated 1 o/p
EZA2500-32048
2500W Bi-Directional DC-DC ConverterRack mount
2500 2500 Rack mount 1 o/p
HQA
85W - 120W Harsh Environment Quarter Brick ConvertersIsolated PCB mount
85 120 Isolated PCB mount 1 o/p
i3A
100W, 9-53V Input Non-isolated DC-DC ConvertersPOL Non isolated
100 100 POL Non isolated 1 o/p
i6A
250W, 9-40V and 9-53V Input Non-isolated DC-DC ConverterPOL Non isolated
46.2 250 POL Non isolated 1 o/p
iAF
20A Non-isolated SMT POL ConvertersPOL Non isolated
14 110 POL Non isolated 1 o/p
iAH
40A Non-isolated SMT Point of LoadPOL Non isolated
28 110 POL Non isolated 1 o/p
iBF
12A Non-isolated SMT DOSA 2 POL ConvertersPOL Non isolated
8.4 60 POL Non isolated 1 o/p
iBH
20A Non-isolated SMT Point of LoadPOL Non isolated
14 110 POL Non isolated DC-DC / 1 o/p
iCF
3A Non-isolated SMT DOSA 2 POL ConvertersPOL Non isolated
2.1 15 POL Non isolated 1 o/p
iCG
6A Non-isolated SMT DOSA 2 POL ConvertersPOL Non isolated
4.2 30 POL Non isolated 1 o/p
iCH
85W, 12A Non-isolated SMT Point of LoadPOL Non isolated
85 85 POL Non isolated 1 o/p
iEH
300-317W Eighth Brick ConverterIsolated PCB mount
300 317 Isolated PCB mount 1 o/p
iQG
300-504W Quarter Brick DC-DC convertersIsolated PCB mount
300 504 Isolated PCB mount 1 o/p
PH-A
NEW
50W-600W High Density Power ModulesIsolated PCB mount
50 600 Isolated PCB mount 1 o/p
PL
3.75W-100W DC-DC POL convertersPOL Non isolated
3.75 100 POL Non isolated 1 o/p
PXA
15W DC-DC convertersIsolated PCB mount
11.6 15 Isolated PCB mount 1 to 2 o/ps
PXB
15W Single & Dual DC-DC convertersIsolated PCB mount
13.2 15 Isolated PCB mount 1 to 2 o/ps
PXC
5W Isolated DC-DC convertersIsolated PCB mount
3.3 6 Isolated PCB mount 1 to 2 o/ps
PXD
Isolated PCB mount DC-DC converters Isolated PCB mount
6.6 30 Isolated PCB mount 1 to 2 o/ps
PXE
20W-30W DC-DC ConverterIsolated PCB mount
19.8 30 Isolated PCB mount 1 to 2 o/ps
PXF
40W&60W DC-DC convertersIsolated PCB mount
24 60 Isolated PCB mount 1 to 3 o/ps
Vega DC
450W DC-DC converterChassis mount
450 450 Chassis mount 1 to 10 o/ps

Latest DC-DC Converters

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

i7A

The i7A 33A series can be used to derive additional high power outputs from a 24V, 36V or 48V DC power supply, at a much lower cost than isolated DC-DC converters. 
Efficiencies of up to 98% minimise internal losses and allow the i7A to operate in ambient temperatures of -40oC to +125oC, even with low airflow conditions.  The i7A’s design provides low output ripple and excellent response to dynamic loads. Very few required external components are required, compared to discrete solutions, saving cost and printed circuit board space.

A choice of three mechanical configurations is available, measuring just 34mm wide and 36.8mm in length. The 11.5mm high open frame model is most suitable for applications requiring a very low profile. A baseplate version for conduction cooling to a cold plate is 12.7mm high, or models with an integral heatsink for convection or forced air cooling are 24.9mm high.

Standard features include an output voltage adjustment trim pin, + remote sense, remote on-off (positive or negative logic), input under-voltage, over-current and over-temperature protection.

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

PXG-M

Certified to the IEC 60601-1 and IEC 62368-1 standards for Medical and Audio/Video, Information and Communication Technology Equipment, the PXG Medical series is housed in the industry standard 1.6” x 1” DIP package.
Featuring an input to output isolation voltage of 5,000Vac and accepting
either a 9 to 36Vdc or 18 to 75Vdc input, the PXG Medical series is available with output voltages of 5, 12, 15, 24, +/- 5, +/- 12 and +/- 15Vdc. Operation from 12V and 24V, or 24V and 48V nominal inputs reduces inventory carrying costs and improves part availability.
 

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

PXD-M

Certified to the IEC 60601-1 and IEC 62368-1 standards for Medical and Audio/Video, Information and Communication Technology Equipment, the PXD Medical series is housed in the industry  standard 2” x 1 package. Featuring an input to output isolation voltage of 5,000Vac and accepting either a 9 to 36Vdc or 18 to 75Vdc input, the PXD Medical series is available with output voltages of 5, 12, 15, 24, +/- 5, +/- 12 and +/- 15Vdc. Operation from 12V and 24V, or 24V and 48V nominal inputs reduces inventory carrying costs and improves part availability.
 

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

i7C

 
The i7C series of non-isolated step-up / step-down converters are ideal for generating additional DC output voltage rails up to 300 W from a single output 12V, 24V or 48V AC-DC power supply. The highly efficient i7C series accepts a very wide DC input and has a wide output adjustment range. Three mechanical configurations are available; low profile open frame, baseplate construction for conduction cooling, or integral heat sink for convection or forced air cooling. A full feature Power Good signal, switching frequency synchronization and output current monitoring option is available.
 

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

DDA

The DDA DIN rail mount, non-isolated step-down converters are ideal for creating additional high current output voltages from a single output 24V or 48V AC-DC power supply. This highly efficient, compact series accepts a very wide DC input and has a wide output adjustment range with a choice of single or dual output models.

Additional Products

TDK-Lambda - Trusted, Innovative, Reliable

PAGE TOP