Name:

Email address:
 

Country:

Mobile Number:

Message:

Alternatively, you can contact us like this:

Welcome to the TDK-Lambda Technical Centre

Latest TDK-Lambda Product Videos

Our videos are hosted by Vimeo.By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

CCG

The 1.5 – 3W CCG units are housed in a compact plastic case and are available with through-hole or surface-mount terminations.  These models have wide input ranges of 4.5 to 18V, 9 to 36V or 18 to 76Vdc. Packaged in the industry standard 1 x 1 inch footprint, the 15 - 30W rated models can operate over 9 to 36V or 18 to 76Vdc input ranges. The units are enclosed in a metal case with 6-sided shielding for lower noise and are encapsulated for rugged shock and vibration performance.

The CCG series is available with output voltages of 3.3, 5, 12, +/-12, 15, +/-15Vdc, 24 or 30. These high efficiency converters (up to 91%) will operate in ambient temperatures of -40°C up to +100°C. Input to output isolation is 1,500Vdc.

Our videos are hosted by Vimeo.By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

CUS500M1

The compact CUS500M1 series of single output AC-DC power supplies are available with 12V, 19V, 24V, 28V, 32V, 36V and 48V outputs in an industry standard 3 x 5 inch package and can deliver 500W with forced air cooling or 300W with 500W peak power when convection cooled.
CUS500M1 can be used in both Class I and Class II (no earth wire) applications and offers efficiencies of up to 96%. A cover with integral end mounted fan option is available.
Safety certifications include IEC/EN/ES 60601-1 and IEC/EN/UL 62368-1 with UKCA and CE marking for the Low Voltage, EMC and RoHS Directives. The units also comply with EN 55011-B and EN 55032-B conducted and radiated emissions, and meet the EN 61000-3-2 harmonics, IEC60601-1-2 Edition 4 and IEC 61000-4 immunity standards.
Typical applications include medical (B and BF type), home healthcare, dental, test and measurement, broadcast, professional audio and industrial equipment.

Our videos are hosted by Vimeo.By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

R Series

This extensive series covers a wide range of industrial and medical applications, including models utilising amorphous core technology that protect against damaging high voltage pulses. With current ratings of 0.5A to 1,000A, the series is available with 250V single phase or 500V three-phase inputs. DIN rail (up to 30A) or chassis mounting case styles are offered, along with a choice of standard or medical leakage versions.

Our videos are hosted by Vimeo.By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

SFL

The series comprises of 300W (3U high half-rack) and 1,000W (3U high full-rack) power levels and either a 120Vdc or 500Vdc maximum rating. The units operate in 7 different load modes and 4 operating modes. This allows the user to perform up to 17 different load tests on DC power supplies, fuel cells, solar cells, batteries and components to fully characterise their performance.

The loads can be programmed for multiple load types, including constant current, constant resistance, constant power, external control, short circuit, and constant voltage with a current limit. The operating modes are normal, pulsed load (dynamic time and frequency), complex waveform generation and "sweep" to test and determine a product's voltage-current, overcurrent or power limit characteristics. Eight load settings can be stored internally.

Up to 10 units may be paralleled in a master-slave arrangement for higher power requirements. Multiple SFL loads can also be connected to separate devices for synchronised load control and dynamic operation. The series can be programmed using analogue or digital signals, with an optional ripple and noise measurement and IEEE interface.
 

Our videos are hosted by Vimeo.By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

CUS350MP

The CUS350MP-1000 AC-DC power supplies are rated at 350W continuous and 1000W peak power output with convection cooling for applications requiring low audible noise or 500W continuous, 1000W peak power with forced air. The series is certified to IEC60601-1 3rd edition (medical), IEC62368-1 and IEC62477-1 (OVCⅢ) with compliance to the EN60601-1-2:2015 Edition 4 immunity requirements. With efficiencies of up to 94%, waste heat is reduced allowing the power supply to operate reliably in a compact 88 x 183 x 44mm package size. A 5V 0.3A standby voltage and remote on/off are fitted as standard. The high peak power rating makes the CUS350MP-1000 suitable for use in printers and other equipment utilizing DC motors.
 

Additional Technical Centre Resources

PAGE TOP

PAGE TOP