Browse our EMC Filters, EMI Filters & Accessories

AC Filters

Pick from all our AC EMC filter & AC EMI filter ranges listed below to get more information about each range.

Pick a product below for more information about that range:

IEC Inlet Series

IEC Inlet Series

  • FEATURED
  • EMC Filters
R Series

R Series

  • FEATURED
  • 0.5 to 1000A, 250 to 500VAC EMI Filters
SIFI Series

SIFI Series

  • FEATURED
  • 2-Line EMC Filters
Product Name
IEC Inlet Series
FEATURED
EMC Filters
R Series
FEATURED
0.5 to 1000A, 250 to 500VAC EMI Filters
SIFI Series
FEATURED
2-Line EMC Filters

TDK-Lambda Filters

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

Show ContentShow Content

DRM40

The DRM40 series of 20 to 40A DIN rail mount redundancy modules can be used in N+1 redundancy applications or to parallel two power supplies for additional power. The DRM40 has a current balancing LED indicator which is illuminated when both power supplies have been adjusted to deliver the same current. Two isolated alarm signals indicate the output voltage status of each power supply. Internally the DRM40 has a low 200mV voltage drop.
 

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

Show ContentShow Content

R Series

This extensive series covers a wide range of industrial and medical applications, including models utilising amorphous core technology that protect against damaging high voltage pulses. With current ratings of 0.5A to 1,000A, the series is available with 250V single phase or 500V three-phase inputs. DIN rail (up to 30A) or chassis mounting case styles are offered, along with a choice of standard or medical leakage versions.

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

Show ContentShow Content

R Series

This extensive series covers a wide range of industrial and medical applications, including models utilising amorphous core technology that protect against damaging high voltage pulses. With current ratings of 0.5A to 1,000A, the series is available with 250V single phase or 500V three-phase inputs. DIN rail (up to 30A) or chassis mounting case styles are offered, along with a choice of standard or medical leakage versions.

Our videos are hosted by Vimeo. By viewing this content you are agreeing to the Terms & Privacy Policy laid out on the Vimeo website.

Show ContentShow Content

iDQ

Rated at 10A with a maximum voltage of 75V, this board mounted EMC filter offers exceptional differential mode performance, making it ideal for use with DC-DC converters and thus saving on printed circuit board area. Utilising TDK component technology, system level compliance to FCC and CISPR is made easier. Extra capacitance to ground can be added to further enhance common mode performance.

Additional Products

PAGE TOP